French Country Table & Chairs Makeover

Chairs BEFORE.

French Country Table & Chairs Makeover
I picked up this table and chairs set a few months ago with high hopes of refinishing them into something be-you-ti-ful! They did not disappoint!

Table BEFORE.

The pretty fluted legs and molding details are really what make this set special. I knew with a little love (and a lot of sweat), I could bring out those details, so I got to work. First, as always, is the sanding. Lots and lots and lots of sanding. The trouble with pretty little details is they don't like to be sanded. But I did my best.

Next was painting. I used an ivory latex color to coat the whole thing except, of course, for the top of the table. That got a dark walnut stain. Gorgeous!

After painting, I distressed with some sandpaper, glazed with a mix of acrylic paint and water, and sealed it all with spray-sealer. After staining the table, I sealed it, too with a matte finish Mod Podge. Three coats. They were brushed on with a sponge brush (you can find these cheap in Walmart's paint section).



Pretty details.
Ugly cushions

Finally, I had to cover those hideous chair cushions. While in great condition, the fabric just screamed ugly. Loudly and annoyingly. So I covered up that nasty jungle print with faux grain sack that I made myself. I bought a darker muslin fabric and also a striped fabric. Then I printed images from The Graphics Fairy and used Citra Solv to transfer the images onto the fabric. This is like magic. The kind you only dreamed of as a child. You can find out more about Citra Solv image transfer here. FYI, I washed the fabric directly after transferring the images, and yes! They do stay!

Despite a few imperfections, I think the table & chairs are beautiful! I'm only sad that my Porch will most likely be closing down soon for winter. :(

AFTER! So pretty!

 

 

"Grain Sack" Cushions.

Love the details!

Lesson from a Pedestal Table

I am what the world would call a dreamer. Impossibly big ideas + impossibly big ego = dreamer. I see a project and think, "I can do that!" Sometimes it's true, and other times it isn't. Let me explain this using the project On My Porch this week: Free Pedestal Table.

If you recall, my hubby found this baby FREE on a curb! I was so excited for this project and had Really Big Ideas for it. So, I got to work.

First, I sanded the table using an orbital sander and also a sanding block. I started with the top, but since that's where my Impossibly Big Idea and Impossibly Big Ego were both shattered, let's talk about the base instead.

The Base
The lovely angles of the base would not permit orbital sanding, so it was all done by hand. I just roughed up the surface, not bothering to remove ALL the old finish. I mean, it's only the bottom, so why bother? I also covered the brass plates with card stock, cut to size, to keep the paint off. Then I painted the base with a creamy interior latex, sanded the edges by hand for a "worn" look, and finished with my own homemade version of an antique glaze, which is basically dark-brown acrylic paint and water. I brushed this mixture over the white paint, then wiped it away, leaving a slight hint of the brownness behind for an aging effect. Beautiful.

And now, we come to the table top. The sanding went... (wait for it)... SMOOTHLY! The old finish practically melted off like butter on a hot corn cob. It was perfection! Then I did something really, really stupid. I did a stain/varnish combo in walnut. This, in itself, was not stupid. It actually turned out very pretty, especially after two coats (4-6 hours of drying time each) and a final clear coat over all.

Soap-paint was the only thing
that even slightly transferred.

Here's where the stupid comes in.
You see, I was planning to put a very elaborate French graphic (from the always-amazing Graphics Fairy) onto this table. I planned and measured it PERFECTLY. It took me hours of Photoshop work and looking up the French word for shoes on Google translator (chaussures), and then using the existing words in the same font to actually write the French word for shoes into the design. I thought I was very wise in planning for the extra table leaf, too, since the leaf could be removed, and the graphic would still look AWESOME, and the seams would match up to perfection! Clever me! Except for one fatal flaw: I cannot transfer this graphic onto the shiny slick surface of the table top.

SPLAT!

I tried. A lot. I tried black crayon, black paint, black paint mixed with soap, which almost kinda, sorta worked. But didn't. And to top it off, I splattered it all over my shirt. In the end, I realized I was defeated by the amazingly shiny, slick surface that I, myself, had created. I realize now I should have put the graphic on BEFORE finishing the table. And there is no way that I can possibly freehand this design without it looking like a four year-old did it. (No offense to four year-olds.) If only I had a projector! Alas, I do not.

French graphic I
was not able to use.
(This time.)

And so, my French graphic, French country table is just a regular old French country table. Which really isn't so bad. Hubby fixed the slidy mechanism for the leaf, which works like a dream! I can put in and remove the leaf myself without any help thanks to his skills and a little WD-40.

So, sans-graphic, this baby is ready to sell except for the fact that it has no chairs. Don't get me started about my quest to find reasonably-priced chairs, though. That is a blog for another day!